Tech Sheets

Can’t find the Tech sheet your looking for? Shoot us an email at sales@emeraldcoatings.com and let us know which one you are looking for.

Airbrush Kit Instructions

Instruction sheet for using an air brush.

Aluminum & Copper Polishing Kit

Instruction sheet for the Aluminum/Copper polishing kit

B9, B913, B929 Instructions and SDS

Instructions and SDS for all Metal-X Nickel Strippers

BLACK NICKEL INSTRUCTIONS

BLACK NICKEL INSTRUCTIONS

BLACK OXIDE INSTRUCTIONS

Instructions for our Black Oxide Kit

BLACK OXIDE INSTRUCTIONS FROM CASWELL MANUAL

Instructions for our Black Oxide Kit in more depth

BLACK OXIDE BATH CONTROL PROCEDURE

Black oxide batch controle procedure

BRONZING BABY SHOES

Describes the products required for bronzing baby shoes and the procedure to follow

BUFFING AND POLISHING GUIDE

Instruction to Buffing And Polishing

BUFFING FINISH VS PLATING FINISH

Good picture that shows the difference in plating over different surface finishes

CASWELD HOW TO INSTRUCTIONS

A link to the Casweld Soldering Manuual

CALCULATING AREA FOR ELECTROPLATING

Explains how to calculate surface area of various sized parts. To be used when determining amperage requirements for plating.

CONTROLLING THE POWER SOURCE FOR PLATING

Describes how to control various power sources for plating, including using light bulbs as a resistor.

ELECTROLESS COPPER KIT INSTRUCTIONS

Instructions For Plating With Our Electroless Copper system, including plating PCB Thru-Holes

CASWELL ONE-PLATE® 1 ELECTROLESS NICKEL KIT instructions

CASWELL ONE-PLATE® 1 ELECTROLESS NICKEL KIT instructions

EVAPO RUST INSTRUCTIONS

Revoving rust with Evapo rust.

GAS TANK SEALER INSTRUCTIONS

Gas tank sealer instructions

GAS TANK SEALER TECH SHEET

Gas tank sealer Tech Sheet with pictures and instructions

HARD COAT INSTRUCTIONS

Hard coat anodizing instructions

HOW DO I DISPOSE OF LEFT OVER CHEMICALS

How Do I Dispose Of Left Over Chemicals

LCD ANODIZING INSTRUCTIONS

Read our LCD Anodizing Kit Instructions

METAL CHART

The Caswell Metal finishing chart that tells you which metals can be plated with each kit

MIXING ADDITIVES IN PAINT OR CLEAR COATS

Inter-coat vs base mixing with pearl and flake additives in paint

NICKEL PLATING

Nickel plating instructions

PLATING GLASS

Instructions for plating glass

PLATING LEAD BULLETS

How to plate lead bullets with our Flash Copper system.

PLUG N PLATE® KIT INSTRUCTIONS

These instructions are included in all our Plug N Plate(R) Kits.

PLUG N PLATE KIT TROUBLE SHOOTING

If your Plug N Plate® kit doesn’t plate, check the following things:

POWDER COATING GUN USER MANUAL (EZ50 GUN)

Redline ez50 powder coating gun Manual

POWDER COATING TIPS AND PROPER GROUNDING

Tech sheet on proper grounding for powder coating and other tips

POWER SUPPLY INFO

Power supply info

PROFFESIONAL GOLD PNP

Proffesional gold PNP Instructions

PTFE ELECTROLESS NICKEL INSTRUCTIONS

Instructions for our PTFE Electroless Nickel Kit

REPROCHROME PLATING INSTRUCTIONS

Describes how to use the new Caswell REPROCHROME plating kit

SCIENCE PLATING KITS (ZINC)

Instructions for our science plating kits

STAINLESS STEEL ACTIVATOR FOR GOLD

Instructions for using our stainless steel activator for gold solution. Enables direct gold plating onto stainless.

STAINLESS STEEL BLACKENER

instructions for stainless steel Blackener

TITANIUM ANODIZING

Explains how to anodize titanium

WATER BREAK TEST

Instructions on how to do the water break test

WORONKO PLATING CHAMBER

Plate long, thin parts without a huge tank with this ingenious design by Mr Henry Woronko.

White Wall Tire Paint

Paint your own tires with our white wall tire paint

YELLOW CHROMATE

Yellow chromate instructions

YELLOW CADMIUM PLATING

Tech write up on Yellow Cadmium Plating

ZINC AND COPY CAD PLATING INSTRUCTIONS

Zinc and Copy Cad plating instructions